Spray Guns
Fusion AP
Graco Fusion Air Purge gun has a long life mix chamber and durable side seals, designed to reduce maintenance and downtime and provide a better mix.
- Easy air-blast tip cleaning reduces build-up and tip clogging
- Quick-release fluid housing - lets you easily change the mix chambers without tools
- Hand tightened front cap - no tools needed to clean and maintain seals and mix chamber
- Ergonomic handle
Materials Sprayed:Foam and coatings
Maximum Output:50 lb/min (22.7 kg/min)
Minimum Output:3 lb/min (1.4 kg/min)
Maximum Fluid Working Pressure:3500 psi (240 bar - 24.0 Mpa)
Maximum working air inlet pressure:130 psi (9 bar - 0.9 Mpa)
Maximum Fluid Temperature:200 F (93 C)
Weight:3.1 lb (1.4 kg)
D-Gun
Graco D-Gun is ideal for small to midrange output foam applications such as interior roof and stud-wall spraying. A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application.
- Lightweight, easy to operate and maintain
- Mechanically self-cleaning so you eliminate costly solvent-flushing
- Air cap allows for easy cleaning of the purge rod
- Pattern control knob allows for fine tune adjustments
Materials Sprayed:Foam Only
Maximum Output:16 lb/min (7.2 kg/min)
Minimum Output:2 lb/min (1 kg/min)
Maximum Fluid Working Pressure:1000 psi (69 bar - 6.9 Mpa)
Maximum working air inlet pressure:110 psi (7.6 bar - 0.76 Mpa)
Maximum Fluid Temperature:150 F (65 C)
Weight:3.1 lb (1.4 kg)
Probler P2
The Probler P2 Gun is lightweight and easy to manoeuvre - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force – much more than a smaller piston diameter.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
Materials Sprayed:Foam and Coatings
Maximum Output:40 lb/min (18 kg/min)
Minimum Output:3 lb/min (1.4 kg/min)
Maximum Fluid Working Pressure:3200 psi (221 bar - 22.1 Mpa)
Maximum working air inlet pressure:110 psi (7.6 bar - 0.76 Mpa)
Maximum Fluid Temperature:200 F (93 C)
Weight:3.0 lb (1.4 kg)
GX-7
Graco GX-7 plural component spray gun for sprayed polyurethane foams. The GX-7 mechanical-purge spray guns are designed for dependable performance and reliability and are designed to handle the toughest job-site conditions.
- Great mixing and pattern control with its unique internal impingement mixing design
- Industry-proven mix and atomization technology
- Adjustable air cap cleaning allows you to spray longer
- Easy to clean A and B air filters reduce downtime
Materials Sprayed:Foam Only
Maximum Output:40 lb/min (18 kg/min)
Minimum Output:3.5 lb/min (1.6 kg/min)
Maximum Fluid Working Pressure:3500 psi (240 bar - 24.0 Mpa)
Maximum working air inlet pressure:125 psi (8.6 bar - 0.86 Mpa)
Maximum Fluid Temperature:200 F (93 C)
Weight:4.1 lb (1.9 kg)
